A v a l o n A c o u s t i c s
P R E C I S I O N M O N I T O R 1
PM 1
The Precision Monitor Line consists of four models. These are all-new clean sheet designs which feature new cabinets, dirvers and crossovers. Drawing on decades of design and manufacturing experience, these are designed to provide you with endless hours of musical enjoyment.
The PM 1 is the smallest of the four. It provides a musically engaging sound and represents a true value in a compact, floorstanding speaker.
Manufactured by Avalon Acoustics to their exacting standards, the PM 1 is available in a variety of finishes. Standard finishes are Birdseye Maple clear, Polychrome Light or Polychrome Dark. Premium finishes include Curly Maple, Quilted Cherry, Figured Walnut, etc. In addition you can choose from either a clear coat Satin or High Gloss finish.
Selected Design Highlights
PRECISION MONITOR 1 is a high-efficiency floor-standing reference monitor, designedspecifically for generating maximum dynamic contrast and effective sound pressure levels froma compact chassis. Ease of driveability through a non- reactive impedance load presents lowpowered tube or solid-state electronics with an ideal interface for generating maximum SPL perwatt of power applied.
FEATURES• Proprietary Silent Inert Cabinet material/process • Advanced light weight driver diaphragm materials minimize energy storage andtime-domain distortion • Each driver individually tested and matched for optimum performance • Smooth, wide polar response for superlative imaging capabilities • Exceptional impedance characteristic allows for ideal interface with any amplifier • Crossover circuitry is hard-wired with surface-only conductors, eliminating deleterioussonic effects of printed-circuit boards • Maximum energy transfer from low power amplification • Careful crossover control of all magnetic field interaction • Proprietary magnetics technology increases energy transfer and reduces noise floor • Constrained-mode damping system absorbs cabinet vibrations • Three and one-quarter inch thick front panel supplies acoustically inert wave-launchplatform • Proprietary phase-linear filter and damping networks • Distinctive faceted cabinet design provides optimal polar characteristics
FEATURES• Proprietary Silent Inert Cabinet material/process • Advanced light weight driver diaphragm materials minimize energy storage andtime-domain distortion • Each driver individually tested and matched for optimum performance • Smooth, wide polar response for superlative imaging capabilities • Exceptional impedance characteristic allows for ideal interface with any amplifier • Crossover circuitry is hard-wired with surface-only conductors, eliminating deleterioussonic effects of printed-circuit boards • Maximum energy transfer from low power amplification • Careful crossover control of all magnetic field interaction • Proprietary magnetics technology increases energy transfer and reduces noise floor • Constrained-mode damping system absorbs cabinet vibrations • Three and one-quarter inch thick front panel supplies acoustically inert wave-launchplatform • Proprietary phase-linear filter and damping networks • Distinctive faceted cabinet design provides optimal polar characteristics
PM1 SPECIFICATIONS
Driver Complement1" Concave Carbon/Glass Tweeter2 x 7.5” Nomex Kevlar Composite Cone Woofers
Sensitivity
93 dB
Impedance
4 Ohms Nominal
Frequency Response
28 Hz to 25 kHz
Recommended Amplifier Power
15 to 200 Watts
Speaker Wire Terminals
Two position Binding Post
Dimensions
37" (94 cm) H
10" (25 cm) W
17" (43 cm) D
Weight - each
54 Pounds
25 kg
Please note that all of the information and specifications provided herein are subject to change.
